AKLC400蓝宝石切削液 AKLC400半导体切削液 AKLC400太阳能硅片切削液
蓝宝石切削液 半导体切削液 太阳能硅片切削液
Application:  Diamond Wire Sawing Process
用途：金刚石线锯流程
AKLC400 Coolant- lubricant is a biodegradable water based, non caustic material
AKLC400系列冷却剂-润滑剂是一种可生物降解、水性、非碱性物质
Dilution ratio of DI /RO water: Slicing Fluid is  10:1  -  50 :1
去离子水/反渗透水溶液比例:切片液 - 10:1至50:1
Effectively reduces the surface tension of cutting/slicing water solution to about  22.0 mN/m
能够有效地将切削/切片水溶液的表面张力降低到大约22.0 mN/m
Increases heat transfer (heat dissipation) hence reduces thermal stress
可以加快传热(散热)速度，减少生热和热应力
Outstanding wetting and rinsing properties
极好的湿润和冲洗功能
Environmental Benefits and Cost
环保优势和成本
Biodegradable, non-hazardous and hence easily disposable
可生物降解、无危害，可以很容易进行处置
Biochemical Oxygen Demand (BOD) < 2.0 mg/L (BOD less than 2.0 mg/L)
生化需氧量(BOD) < 2.0 mg/L (BOD小于2.0 mg/L)
Chemical Oxygen Demand (COD) < 10.0 mg/L (COD less than 10.0 mg/L)
化学需氧量(COD) < 10.0 mg/L (COD小于10.0 mg/L)
Elimination of Slurry management
不必进行砂浆管理
No PEG & SiC hazardous waste management
不必进行聚乙二醇(PEG)和碳化硅(SiC)等危险废物管理
该产品用于蓝宝石多线切割，能有效延长金钢线的使用寿命，降低生产成本
专业代理美国UDM硅片切削液 蓝宝石切削液 蓝宝石切割液 晶体切割液 晶体切削液